2016 PM PL74S MOUNTED ON 2016 PETERBILT 567 (Reconditioned)
728,991 د.إ.
Machine Location:945 NORTH MAIN STREETBluffton, Indiana, USA 46714
Seller Information
View Seller InformationGeneral
Year
2016
Manufacturer
Model
Upper Hours
4,895
Serial Number
G-13800711594
Condition
Used
Stock Number
G-D363035
Hours Meter
Accurate / Verified
Product Configuration
PM MATERIAL HANDELING CRANE WITH 25' PLATFORM FLATBED
Operating Condition
Operable
Rebuild Type
Reconditioned
Description
I would install a boom tip hook or whatever device best suits what you plan to lift.
STK# G-D363035
TRUCK VIN: 1NPCLP0X4GD363035
CRANE SN: G13800711549
2016 PETERBILT 567 HEAVY SPEC SEVERE-DUTY LONG WHEELBASE TANDEM TRUCK
312" WHEELBASE, DOUBLE "C" CHANNEL FRAME
20,000 LB. FRONT AXLE w/DUAL P/S
PACCAR MX-13 430 HP/1550 LB-FT TORQUE DIESEL ENGINE
EATON / FULLER RTO-16908LL ON- and OFF- HIGHWAY TRANSMISSION
• 8 ROAD SPEEDS w/OVERDRIVE TOP GEAR
• PLUS 2 EXTRA DEEP REDUCTION RATIOS (LO AND LO-LO)
• AND 3 REVERSE GEARS
46,000 LB. TANDEM FULL LOCKING DIFFERENTIALS
3.73 TANDEM REAR RATIO
HENDRICKSON HMX-460 46K# ON- and OFF- HIGHWAY SUSPENSION
ODOMETER READS: 140,607 MILES
24' 6" LONG X 102" WIDE STRUCTURAL STEEL EXTREME-DUTY PLATFORM FLATBED HAUL BODY
2016 PM PL 74 S (MANITEX POWERLIFT) MATERIAL HANDLING ARTICULATING KNUCKLE BOOM CRANE
• w/4 TELESCOPIC EXTENDING BOOM SECTIONS TO 74' VERTICAL & 63' HORIZONTAL
Asking $198,500.
When upfitted with hydraulic tilting, folding, and rotating material-handling forks. The crane can lift palletized roofing and other palletized goods.
The upfitted forks also tilt, fold, and hold drywall and wallboard when delivering, moving, and placing it through a small opening into a multi-story building.
This crane's outer arm utilizes a telescopic extending system to achieve its long reach.
This crane combines the tight folding capabilities of an articulating crane with the long extension of structural telescoping sections.
The PM PL 74 S LOAD MONITORING SYSTEM OPTIONS
• Hydraulic load limiting device (S version) ensures the crane always operates safely with the highest performance.
• Combined with its proportional load-sensing control valve bank, the crane operates more smoothly and faster. This is technology at work!
HYDRAULIC SYSTEM
• Horizontal swivel PARKER located on the crane base.
• Proportional compensated DANFOSS valve bank.
• Double hydraulic circuit with double inlet filter (top seat).
• Maximum performance without regenerative valves.
VRBC valves:
• Improved maneuverability and precision.
• Simplified stabilizer control station, thanks to a double valve bank, pre-arranged for supplementary
stabilizers, and a horizontal stabilizer lever.
TWO CONTROL STATIONS
#1. TOP SEAT
• Joystick and pedals.
• Split Danfoss valve bank.
• Radio remote.
#2. GROUND CONTROL
• Danfoss valve bank.
• Radio remote.
MULTIFUNCTION RADIO REMOTE CONTROL
• S version without a display on the radio remote.
Specs
Model PL74 S
Maximum lifting moment ft. lbs. 187480
Maximum hydraulic reach Horizontal ft. 61' 2"
Vertical ft. 73' 8"
Hydraulic system
Recommended oil flow gals/min 16+ 16
Rated pressure psi 4420
Tank Capacity gals 53
Slewing system
Slewing Angle o 410 degrees
Slewing moment ft lbs. 32450
Max. working heel % (o) 8.7(5)
Standard Crane Weight lbs. 9240
Max. power absorbed by hydraulic pump 45
Truck Mounted
Truck Year
2016
Truck Manufacturer
PETERBILT
Truck Model
567
VIN
1NPCLPOX4GD363035
Mileage
226,285 km
Odometer
Accurate / Verified
State DOT
Yes
Truck Engine
Horsepower
320.65 kw
Engine Manufacturer
Paccar
Engine Serial Number
Y096689
Fuel Type
Diesel
Engine Brake
Yes
Turbo
Yes
Truck Powertrain
Drive
2WD
Transmission
8LL
# of Forward Speeds
10
# of Reverse Speeds
3
Truck Specific
Suspension
Hendrickson HMX460
Twin Steer
Yes
Number of Rear Axles
Tandem
Wheelbase
792.48 cm
Gross Vehicle Weight Rating
Class 8: 33,001 pounds or greater
Front Axle GWR
8,890.41 kg
Rear Axle GWR
20,865.25 kg
Length
12.8 m
Drive Side
Left Hand Drive
Wet Kit
Yes
Flat deck
Yes
Capacities
Lift Capacity
3,801.1 kg
Fuel Capacity
302.83 L
Oil Tank Capacity
200.63 L
Attachments
Material Handler
Yes
Category Specific
Mount Type
Behind Cab
Max Horizontal Reach
18.9 m
Max Vertical Reach
22.56 m
Max Lifting Moment
254,188.75 Nm
Max Main Boom Length
21.34 m
Number of Boom Extensions
10.16 cm
Outriggers
Yes
Number of Outriggers
4
Outrigger Span
7.32 m
Max Operating Pressure
304.75 b
Load Moment Indicator
Yes
Crane Rotation
430 °
Crane Rotation Type
Non-continuous
Crane Rotation Torque
43,996.29 Nm
Remote Control System
Yes
Top Seat
Yes
Exterior
Auxiliary Lighting
Yes
Interior
A/C
Yes
A/C Condition
Good
Heater
Yes
Shipping Dimensions
Shipping Length
106.68 cm
Shipping Width
243.84 cm
Shipping Weight
13,562.41 kg