2025 NATIONAL NBT60XL MOUNTED ON 2025 PETERBILT 567

2025

New

ONE NEW 2025 NATIONAL TRUCK MOUNTED HYDRAULIC CRANE, MODEL NBT60XL, 60 TON CAPACITY, complete with: . Boom: Five (5) section, 36 - 151 ft (11 - 45,7 m) four plate, full power telescoping cylinder with integral holding valve. Four (4) quick reeve cast iron sheaves. Rated Capacity Limiter & Anti-two Block Systems: Graphical color RCL system with audio/visual warning system and control lever lockout. Electronic display of boom angle, boom length, relative load moment indication, rated load, load, radius and boom tip height. Internal anti-two block system. Standard WADS (Work Area Definition System) allows operator to pre-select and define safe working areas. When crane approaches set limits, audio/visual warnings alert the operator of the jobsite obstructions. JIB Option: 36 ft (11 m) fixed length lattice jib offsettable at 0° and 30° (side fold for stowing) Counterweight: Two (2) 3,000 lb (1360 kg) and two (2) 5,000 lb (2268 kg) hydraulically removable counterweight slabs, Tilting Crane Cab: All steel construction with a 0° to 20° hydraulic tilting cab with acoustical lining and tinted glass, deluxe seat with armrest mounted electronic controllers, windshield with electric wiper, sliding skylight with wiper and sunshade, hot water cab heater with defroster (diesel fired with remote diesel tank mounted to cab and coolant tank mounted to turret), circulating fan, air conditioning, fire extinguisher, dual cab mounted work lights, engine start/stop switches, hour meter (shown on the RCL display) and signal horn. Swing: 360 degree continuous rotation, planetary "Glide Swing" with foot actuated multi-disc brake and pinion guard. Hoist: One (1) main hoist with grooved drum, two-speed power up and down, automatic multi-disc brake, electronic drum rotation indicator (DRI), and drum cable follower. Bare drum maximum pull 17,250 pounds (7824,5 kg) low speed. Wire Rope: 518 ft (158 m) of 5/8 in (16 mm) diameter 35x7 (5:1 design factor) for main hoist. Single line pull 11,280 pounds (5116,5 kg) Headache Ball/Hook Blocks - Headache Ball (Recommended with jib) for 7 ton (6,35 mt) - 20 ton (18,1 mt) 410 pounds (185,9 kg) single sheave, "Quick Reeve" type block with swivel hook and safety latch. - Four/six part reeving hook block with three (3) sheaves - for 40 ton (36,3 mt) capacity Outriggers: Hydraulic front and rear. Two section extendable beams with integral check valves for 360 degree operation, 20 in (500 mm) diameter polymeric outrigger floats. Controls located in crane cab and both sides of subframe. Outrigger Monitoring System included. NBT60XL offer a three position configuration at 0%, 50% and 100% of full outrigger spread. Miscellaneous Standard Equipment: Back-up alarm, outrigger motion alarm, LED marker and indicator lights, wireless radio ADDITIONAL INCLUDED OPTIONS: - ASO, Auxiliary sheave case assembly and pins only. For use with main hoist rope to center wire rope on sheave case. - Single axis electronic joystick controls (in lieu of standard dual axis controllers) - Boom mounted work lights - mounted on the base section boom section, manually adjustable LED lights with ON/OFF switch located in operator's crane cab. CHASSIS: Installed on a NEW Peterbilt 567 Chassis complete with 260” wheelbase, 22,000 lb front axle, 78,000 lb. tri- drive rear axle, 78,000 lb tri-axle rear suspension – 54” spacing, Cummins X15 525 H.P diesel engine, Allison 4700 RDS-P transmission. 425/65R 22.5 20 ply front tires, 11R 24.5 16 ply rear tires. With 78,000 lbs rear axle speed is limited to 64 mph (103 kph). Peterbilt calculated theoretical mx speed of 75 mph (120 kph) with the 5.25 rear axel ratio and 4700 RDS transmission. Chassis colour: National Platinum (sand Gray) CHASSIS OPTIONS: - 36” x 24”x 24" Aluminum body tool box with Diamond Plate single, drop down door and stainless steel T-handle lock. Truck frame mounted using Black powder coat steel mounts. - 30 Ton bolt in pintle hitch featuring a rigid mounted pintle hook with 7” of vertical adjustment.

2025

PETERBILT

567